What Does Restoration Include?
Three steps on the same cage: hardware, paint, then new screen. One crew owns the job from the first screw to the last panel.
Sarasota, Manatee & Charlotte counties
Screen Armors restores pool cages and lanais in place. One crew strips the old screen, replaces the hardware, paints the aluminum, and installs new screen.
Strip · Paint · Rescreen
Your existing frame can be brought back in about 3 to 4 days, for a fraction of a new build. We take the old screen off, replace the hardware, sand and paint the aluminum, and install new screen. A 3-year warranty covers our labor.
Three steps on the same cage: hardware, paint, then new screen. One crew owns the job from the first screw to the last panel.
An average enclosure is usually finished in about 3 to 4 days. Weather and the size of the cage can change the schedule.
3-year warranty on our labor. Screen materials carry the manufacturer's warranty.
Sarasota, Manatee, and Charlotte counties, including Sarasota, Bradenton, Venice, North Port, Port Charlotte, and Lakewood Ranch. Full list on Areas We Serve.
Pool cage and lanai restoration in Sarasota, Bradenton, Venice, North Port, Port Charlotte, and Lakewood Ranch.
01 · Strip and hardware
The old screen comes off so the frame can be sanded and the hardware replaced before any paint goes on.
Plastic covers the pool first. Screws and debris stay out of the water while the old screen, fasteners, door, and cables come off.
The aluminum frame stays. This is the work that lets an older cage take a new finish and new screen.
02 · Paint
The house is papered and masked well away from the aluminum. Then the enclosure is painted from the roof down.
The paint is water-based Sherwin-Williams. We mix the color from a sample of the factory aluminum finish, so the painted frame matches the original color as closely as possible.
Two coats. Both are sprayed immediately, from the roof down, in left-to-right passes at a 45-degree angle.
03 · Rescreen
New screen goes on in the mesh you choose. Then we check the paint, the door, and the cables.
Choose 18/14, 20/20 no-see-um, heavy-duty polyester, PetScreen, Florida Glass, or shade screen. See the screens we install.
Any paint that needs a touch-up is handled before we leave. Door hardware is adjusted, and the hurricane cables get their final tension.
Optional with a restoration
The cage is already open. This is the time to change the standard post design to a Clearview, on one section or on every wall.
A Clearview gives the pool cage a newer look and an open view.
It can cover one section, or run across every wall. The screen is polyester 16/14, or 17/20 no-see-um polyester. See those screens.
The view stays clear across the enclosure. The structure keeps its strength and its supports.
Restoration labor is covered for three years. Screen materials carry the manufacturer's warranty.
Rusted screws and anchor screws are replaced with 304 marine-grade stainless steel.
Water-based paint, mixed from a sample of the factory aluminum so the color stays close to the original.
Plastic covers the pool during hardware work. The house is masked well away from the aluminum before paint.
The same team strips, paints, and rescreens. An average enclosure is usually finished in about 3 to 4 days.
Hardware, paint, and screen are priced together. The number follows the cage, and the estimate is free.
Three steps on the same enclosure. The old screen comes off, rusted screws are replaced with 304 marine-grade stainless steel, the aluminum is sanded, and the door, hurricane cables, and anchor screws are replaced. The pool is covered during that work. The house is then masked and the frame is painted with two coats of water-based Sherwin-Williams. New screen goes on last, followed by paint touch-ups, door-hardware adjustment, and the final tension on the cables.
Rescreening replaces the mesh. Restoration also replaces the hardware and paints the aluminum before the new screen goes on. When the frame and hardware can stay, screen repair and rescreening is quoted on its own.
An average enclosure is usually finished in about 3 to 4 days. Weather and the size of the cage can change the schedule. The timeline is confirmed with the estimate.
Water-based Sherwin-Williams. Two coats, sprayed immediately from the top of the enclosure down, in left-to-right passes at a 45-degree angle. See how we paint.
Yes. The color is mixed from a sample of the factory aluminum finish, so the painted frame matches the original color as closely as possible.
Rusted screws are replaced with 304 marine-grade stainless steel. Anchor screws, the enclosure door, and the hurricane cables are replaced in the first step. The cables are tightened to finish after the new screen is on, and the door hardware is adjusted before we leave.
Yes. Plastic covers the pool during the hardware work so screws and debris stay out of the water. Before painting, the house is papered and masked well away from the aluminum so overspray stays off the walls, windows, and trim.
The mesh is your choice: 18/14 standard, 20/20 no-see-um, heavy-duty polyester, PetScreen, Florida Glass, or shade screen. See the screens we install.
Yes. While the cage is open, the standard post design can change to a Clearview on one section or on every wall. The screen is polyester 16/14, or 17/20 no-see-um polyester. The enclosure keeps its strength and its supports.
A 3-year warranty covers our labor. Screen materials carry the manufacturer's warranty.
Restoring the frame you already have costs a fraction of a new build, and an average cage is usually finished in about 3 to 4 days. The price is set with a free estimate.
Permits are not required for refurbishing and painting. If a project goes beyond a restoration, we tell you what applies before work starts.
Sarasota, Manatee, and Charlotte counties, including Sarasota, Bradenton, Venice, North Port, Port Charlotte, and Lakewood Ranch. See the full list on Areas We Serve.
Request a free estimate. We look at the enclosure and price the hardware, the paint, and the new screen together.